Garmin ECHOMAP UHD2 5 Series Owner'S Manual Download Page 14 | Manualshive

Page: 14 / 76

background image

Customizing the Data Overlays

You can customize the data in the data overlays shown on a screen.

1 Select an option based on the type of screen you are viewing:

• From a full screen view, select MENU > Edit Overlays.
• From a combination screen, select MENU > Edit Combo > Overlays.

2 Select an item to customize the data and data bar:

• To show the data overlays, select Data, select the location, and select BACK.
• To change the data shown in an overlay box, select the overlay box, select the new data to show, and

select BACK.

• To customize the information shown when navigating, select Navigation, and select an option.
• To turn on other data bars, select Top Bar or Bottom Bar, and select the necessary options.

3 Select Done.

Adjusting the Backlight

1 Select > System > Sounds and Display > Backlight.
2 Adjust the backlight.

TIP: From any screen, press repeatedly to scroll through the brightness levels. This can be helpful when
the brightness is so low you cannot see the screen.

Adjusting the Color Mode

1 Select > System > Sounds and Display > Color Mode.

TIP: Select > Color Mode from any screen to access the color settings.

2 Select an option.

8

Customizing the Chartplotter

«
...
12
13
14
15
16
...
»

Summary of Contents for ECHOMAP UHD2 5 Series













































































Reviews:

No comments

Related manuals for ECHOMAP UHD2 5 Series

Brand: Garmin Pages: 5

Brand: Navman Pages: 64

CAREU U1 Lite(WR)

Brand: S&T Pages: 28

Brand: Blow Pages: 22

Brand: Emerson Pages: 12

GO Real-Time 4G/5G Global

Brand: Emerson Pages: 19

Brand: Chinavision Pages: 21

Brand: Huawei Pages: 4

Brand: Globalsat Pages: 16

Brand: Genius Pages: 17

Brand: Dual Pages: 20

NavAtlas XNAV3500P

Brand: Dual Pages: 32

Brand: Sanav Pages: 31

Brand: Sanav Pages: 68

Brand: VDO Pages: 64

Brand: Govrt Gear Pages: 10

Pulsebit EX PB-20

Brand: Viatom Pages: 88

Brand: Mictrack Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands