Garmin Drivesmart 65 with Amazon Alexa, Owner'S Manual

Page: 23 / 30

4
Select the location description.
5
Select Set Location .
Wireless Network Settings
The wireless network settings allow you to manage Wi
‑
Fi
®
networks, paired Bluetooth devices, and Bluetooth features.
Select
Settings > Wireless Networks .
Bluetooth : Enables Bluetooth wireless technology.
Paired Device Name : The names of paired Bluetooth devices
appear in the menu. You can select a device name to change
Bluetooth feature settings for that device.
Search for Devices : Searches for nearby Bluetooth devices.
Friendly Name : Allows you to enter a friendly name that
identifies your device on other devices with Bluetooth
wireless technology.
Wi-Fi : Enables the Wi
‑
Fi radio.
Saved Networks : Allows you to edit or remove saved networks.
Search for Networks : Searches for nearby Wi
‑
Fi networks
( Connecting to a Wi
‑
Fi Network , page 20 ).
Driver Assistance Settings
Select Settings > Driver Assistance .
Driver Alerts : Allows you to enable or disable alerts for
upcoming zones or road conditions ( Driver Awareness
Features and Alerts , page 6 ).
Speeding Alert : Alerts you when you are exceeding the speed
limit.
Break Planning : Reminds you to take a break and shows
upcoming services after you drive for an extended time. You
can enable or disable break reminders and upcoming service
suggestions.
Proximity Alerts : Alerts you when you approach speed
cameras or red light cameras.
Proximity Alerts Settings
NOTE: You must have custom points of interest (POIs) loaded
for proximity points alerts to display.
NOTE: This feature is not available in all areas.
Select Settings > Driver Assistance > Proximity Alerts .
Audio : Sets the style of alert that plays when you approach
proximity points.
Alerts : Sets the type of proximity points for which alerts are
played.
Backup Camera Settings
The backup camera settings allow you to manage paired
Garmin backup cameras and camera settings. This menu
appears on your navigation device only when the device is
connected to a wireless camera receiver cable. See the owner's
manual for your backup camera for detailed information about
pairing cameras and camera settings. Go to garmin.com
/backupcamera to purchase a Garmin backup camera.
Select Settings > Backup Camera , and select a paired camera.
Unpair : Removes the paired camera. You must pair the camera
again before you can view it using this device and cable.
Rename : Allows you to rename the paired camera.
Guidance Lines : Shows or hides guidance lines and allows you
to adjust the position of the guidance lines.
Display Settings
Select Settings > Display .
Color Mode : Allows you to select day or night color mode. If you
select the Auto option, the device automatically switches to
day or night colors based on the time of day.
Brightness : Allows you to adjust the display brightness.
Display Timeout : Allows you to set the amount of idle time
before your device enters sleep mode while using battery
power.
Screenshot : Allows you to take a picture of the device screen.
Screenshots are saved in the Screenshot folder of the device
storage.
Traffic Settings
From the main menu, select Settings > Traffic .
Traffic : Enables traffic.
Current Provider : Sets the traffic provider to use for traffic data.
The Auto option selects the best available traffic data
automatically.
Optimize Route : Enables the device to use optimized alternate
routes automatically or upon request ( Avoiding Traffic Delays
on Your Route , page 12 ).
Traffic Alerts : Sets the traffic delay severity for which the
device displays a traffic alert.
Units and Time Settings
To open the Units and Time settings page, from the main menu,
select Settings > Units & Time .
Current Time : Sets the device time.
Time Format : Allows you to select a 12-hour, 24-hour, or UTC
display time.
Units : Sets the unit of measure used for distances.
Position Format : Sets the coordinate format and datum used
for geographical coordinates.
Setting the Time
1
From the main menu, select the time.
2
Select an option:
• To set the time automatically using GPS information,
select Automatic .
• To set the time manually, drag the numbers up or down.
Language and Keyboard Settings
To open the Language and Keyboard settings, from the main
menu, select Settings > Language & Keyboard .
Voice Language : Sets the language for voice prompts.
Text Language : Sets all on-screen text to the selected
language.
NOTE: Changing the text language does not change the
language of user-entered data or map data, such as street
names.
Keyboard Language : Enables keyboard languages.
Device and Privacy Settings
Select Settings > Device .
About : Displays the software version number, the unit ID
number, and information on several other software features.
Regulatory : Displays regulatory markings and information.
EULAs : Displays the end-user license agreements.
NOTE: You need this information when you update the
system software or purchase additional map data.
Device Data Reporting : Shares anonymous data to improve
the device.
Settings 19