Garmin dezl 570 Series, Owner'S Manual

Page: 20 / 28

1
Select Apps > Weather .
2
If necessary, select a city.
3
Select > Weather Alerts .
Checking Road Conditions
Before you can use this feature, you must purchase Advanced
Weather service using Smartphone Link.
1
Select Apps > Weather .
2
If necessary, select a city.
3
Select > Road Conditions .
Viewing Previous Routes and Destinations
Before you can use this feature, you must enable the travel
history feature ( Device and Privacy Settings ).
You can view your previous routes and places you have stopped
on the map.
Select Apps > Where I've Been .
Customizing the Device
Map and Vehicle Settings
Select Settings > Map & Vehicle .
Vehicle : Sets the icon that represents your position on the map.
Go to www.garmingarage.com for more icons.
Driving Map View : Sets the perspective on the map.
Map Detail : Sets the level of detail on the map. More detail may
cause the map to draw slower.
Map Theme : Changes the color of the map data.
Map Tools : Sets the shortcuts that appear in the map tools
menu.
Map Layers : Sets the data that appears on the map page
( Customizing the Map Layers ).
myMaps : Sets which installed maps the device uses.
Enabling Maps
You can enable map products installed on your device.
TIP: To purchase additional map products, go to
http://buy.garmin.com .
1 Select Settings > Map & Vehicle > myMaps .
2 Select a map.
Navigation Settings
To open the Navigation settings page, from the main menu,
select Settings > Navigation .
Calculation Mode : Sets the route calculation method.
Avoidances : Sets road features to avoid on a route.
Custom Avoidances : Allows you to avoid specific roads or
areas.
Environmental Zones : Sets the avoidance preferences for
areas with environmental or emissions restrictions that may
apply to your vehicle.
Toll Roads : Sets preferences for avoiding toll roads.
Tolls and Fees : Sets preferences for avoiding toll roads and toll
stickers.
NOTE: This feature is not available in all areas.
Restricted Mode : Disables all functions that require significant
operator attention and could become a distraction while
driving.
GPS Simulator : Stops the device from receiving a GPS signal,
and saves battery power.
Calculation Mode Settings
Select Settings > Navigation > Calculation Mode .
The route calculation is based on road speeds and vehicle
acceleration data for a given route.
Faster Time : Calculates routes that are faster to drive but can
be longer in distance.
Shorter Distance : Calculates routes that are shorter in distance
but can take more time to drive.
Less Fuel : Calculates routes that could use less fuel than other
routes.
Off Road : Calculates a direct line from your location to your
destination.
Setting a Simulated Location
If you are indoors or not receiving satellite signals, you can use
the GPS to set a simulated location.
1
Select Settings > Navigation > GPS Simulator .
2
From the main menu, select View Map .
3
Tap the map twice to select an area.
The address of the location appears at the bottom of the
screen.
4
Select the location description.
5
Select Set Location .
Bluetooth Settings
Select Settings > Bluetooth .
Bluetooth : Enables Bluetooth wireless technology.
Search for Devices : Searches for nearby Bluetooth devices.
Friendly Name : Allows you to enter a friendly name that
identifies your device on other devices with Bluetooth
wireless technology.
Disabling Bluetooth
1
Select Settings > Bluetooth .
2
Select Bluetooth .
Display Settings
To open the Display settings page, from the main menu, select
Settings > Display .
Color Mode : Sets the device to display day or night colors. You
can select Auto to allow the device to automatically set day or
night colors based on the time of day.
Brightness : Adjusts the display brightness.
Display Timeout : Sets the amount of idle time before your
device enters sleep mode.
Screenshot : Allows you to take a picture of the device screen.
Screenshots are saved in the Screenshot folder of the device
storage.
Traffic Settings
To open the traffic settings page, from the main menu, select
Settings > Traffic .
Traffic : Enables traffic.
Current Provider : Sets the traffic provider to use for traffic data.
Auto selects the best available traffic data automatically.
Subscriptions : Lists current traffic subscriptions.
Optimize Route : Selects whether to use optimized alternate
routes automatically or upon request ( Avoiding Traffic Delays
on Your Route ).
Traffic Alerts : Selects the traffic delay severity for which the
device displays a traffic alert.
16 Customizing the Device