2
dēzl 560 Owner’s Manual
Getting Started
Installing the Portable
Friction Mount
If you are using a portable friction
mount, you should follow these
instructions.
1. Plug the vehicle power cable
➊
into the mini-USB connector
➋
on the cradle
➌
.
➋
➊
➌
➍
2. Snap the cradle onto the arm
➍
.
3. Slide the locking lever
➎
on the
base to the unlocked position.
➎
4. Slide the disk on the bottom
of the arm into the base until it
clicks.
5. Slide the locking lever to the
locked position.
6. Fit the bottom of the device into
the cradle.
