Garmin D2 MACH 1, Owner'S Manual

Page: 13 / 146

Editing an Alternate Time Zone
1 From the watch face, hold MENU.
2 Select Clocks > ALT. TIME ZONES > Edit.
3 Select a time zone.
4 Select an option:
• To enter a custom name for the time zone, select Rename Zone.
• To change the time zone, select Change Zone.
• To change the location of the time zone in the glance, select Reorder Zone.
• To delete the time zone, select Delete Zone.
Flying
WARNING
Do not use this watch as a primary means of navigation. See the Important Safety and Product Information
document in the product box for product warnings and other important information prior to use.
This watch is not intended to provide primary flight information and is to be used for supplemental purposes
only.
Selecting a Favorite Airport
When you select a favorite airport, you can view the waypoint and METAR information for it on the default watch
face and aviation glances.
1 Hold MENU.
2 Select Aviation > Favorite Location.
3 Select an option:
• To search for an airport by its identifier, select Search by Ident. and enter all or part of the alphanumeric
identifier.
• To search for an airport near you, select Nearest, and wait while the watch locates satellites.
• To select an airport from your flight plan, select Flight Plan.
A list of airports appears.
4 Select an airport.
Setting the Altitude Alert
You can set an alarm to vibrate when you reach a specified altitude.
NOTE: The altitude alert is not available in watch mode.
1 Hold MENU.
2 Select Aviation > Altimeter Settings > Altitude Alert > Status > On.
3 Select Altitude.
4 Select UP to select an altitude.
Setting the Barometric Pressure Manually
You can set the current barometric pressure manually. This can help to improve the accuracy of the pressure
altitude reading.
1 Hold MENU.
2 Select Aviation > Altimeter Settings > Barometer > Manual.
3 Select UP or DOWN to set the current barometric pressure.
Flying 5