Garmin CS 1522, Owner'S Manual

Page: 65 / 74

5.1 Error Message and Troubleshooting 63
CHAPTER 5 APPENDICES
5.1 Error Message and Troubleshooting
If you encounter an error, refer to the table below for possible solutions.
Error Message Solution
Software Update Required Update the software.
Unit Voltage Alarm
The suggested input voltage is 10–36 VDC. Make
sure there is no significant voltage drop along the
power cable when the unit is in operation.
Lost Remote GPS Connection
Check the connections and the cables connecting
external GPS antenna.
Satellite reception was lost.
Make sure the GPS antenna, whether internal or
external, has a clear view of the sky.
Memory card is write protected. Make sure the Lock switch is slid up to the unlock
position.
Database Error
The device is unable to access the internal memory.
Please contact Garmin Support.
Unsupported Transducer
Connected
Check the connections to the transducer, and make
sure a compatible transducer is connected and that
settings are configured accordingly.
If problems persist, contact Garmin Support.
Sonar module lost: (device)
Check the power and network connections on the
external sonar module and the sonar display.
5.2 Hazardous Substance Table
产品中有害物质的名称及含量
有害物质
部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
印刷电路板组件 × ○ ○ ○ ○ ○
金属零件 × ○ ○ ○ ○ ○
电缆 电缆组件 连接器 × ○ ○ ○ ○ ○
本表格依据 SJ/T11364 的规定编制。
○：表示该有害物质在该部件所有均质材料中的含量均在 GB/T26572 规定的限量要求以下。
×：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572 规定的限量要求。
10