Fishfinder 400C Owner’s Manual
I
nstallIng
the
F
IshFInder
400c
Step 5: Test the Installation
To turn on your Fishfinder 400C for the first time, press and hold the
POWER
key until the unit beeps and turns on. Use the
ROCKER
and the
SElECt
key and follow the screens to configure your Fishfinder 400C.
NOtE:
Although it is possible to perform some checks with the boat trailered, the boat should be in the water to properly test the installation.
To configure your Fishfinder 400C for the first time:
Select a language.
Select a transducer
type.
Select units of
measure.
Select a color
scheme.
The Home screen appears after you select your configuration options. After 15 seconds of inactivity, the fishfinder automatically switches to
Full Screen.
NOtE:
If the transducer is not detected, a “Transducer Disconnected, Sonar Turned Off” message appears.
Summary of Contents for Colorado 400c
Page 1: ...Fishfinder 400C owner s manual...
Page 39: ......
