Colorado
™
Series Owner’s Manual
a
ppendIx
3. Spray a thin film of
Teflon
®
dry lubricant
to all surfaces on
the back of the knob.
4. Let the lubricant dry.
Wipe off any excess with
a clean, lint-free cloth.
5. Replace the knob on
the Colorado.
Software License �greement
BY USING THE Colorado, YOU AGREE TO BE BOUND BY
THE TERMS AND CONDITIONS OF THE FOLLOWING
SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS
AGREEMENT CAREFULLY.
Garmin grants you a limited license to use the software embedded
in this device (the “Software”) in binary executable form in the
normal operation of the product. Title, ownership rights, and
intellectual property rights in and to the Software remain in Garmin.
You acknowledge that the Software is the property of Garmin and
is protected under the United States of America copyright laws
and international copyright treaties. You further acknowledge
that the structure, organization, and code of the Software are
valuable trade secrets of Garmin and that the Software in source
code form remains a valuable trade secret of Garmin. You agree
not to decompile, disassemble, modify, reverse assemble, reverse
engineer, or reduce to human readable form the Software or any
part thereof or create any derivative works based on the Software.
You agree not to export or re-export the Software to any country in
violation of the export control laws of the United States of America.
Declaration of Conformity (DoC)
Hereby, Garmin, declares that this Colorado is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
To view the full Declaration of Conformity, see the
Garmin Web site for your Garmin product:
www.garmin.com/products/Colorado300
www.garmin.com/products/Colorado400i
www.garmin.com/products/Colorado400c
www.garmin.com/products/Colorado400t
Click
Manuals
, and then select the
Declaration of
Conformity
link.
