Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
70
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EAS
Audio and
CNS
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
2)
Touch the
Profile
Tab, if needed. Then touch the
FPA
Button to display the 'VNAV Flight
Path Angle' Screen.
3)
Touch the
Remove FPA
Button.
4)
Touch the
OK
Button. The FPA reverts to the FMS computed value, or to dashes. To
cancel the request, touch the
Cancel
Button.
Changing the flight plan descent FPA default:
1)
From MFW Home, touch
Flight Plan > VNAV
.
2)
Touch the
Descent
Tab.
3)
Touch the
Default
Flight Path Angle
Button to bring up the selection window.
4)
To define a new descent FPA, touch the
Pilot-Defined Descent
Button. Then, use the
keypad and the
Enter
Button to enter the FPA and return to the previous screen.
Or:
To use a pre-defined FPA, touch the desired descent button to select it and return to the
previous screen.
Entering or modifying the VS Target in the active flight plan:
1)
From MFW Home, touch
Flight Plan > VNAV.
2)
Touch the
VS Target
Button to display the 'VNAV VS Target' Screen.
3)
Use the keypad to select the descent rate.
4)
Touch the
Enter
Button to select the new vertical speed target and to display a new
system-calculated FPA.
Vertical Situation Display
Enabling/disabling the VSD:
1)
From MFW Home, touch
Map > Map Selection > Map Settings
.
2)
Touch the
Inset Window
Tab.
3)
Touch the
VERT Situation Display
Button to enable/disable display of the VSD.
Changing the VSD Mode:
1)
From MFW Home, touch
Map > Map Selection > Map Settings
.
2)
Touch the
Inset Window
Tab.
3)
Touch the VERT Situation Display
Settings
Button.
4)
Touch the
Mode
Button to display the 'Mode Selection' Window.
5)
Touch a Mode Selection Button to select it and return to the 'Vertical Situation Display
Settings' Window.
Advisory Descent
Enabling/disabling the Advisory Descent:
1)
From MFW Home, touch
Flight Plan > VNAV
.
