190-00820-11 Rev. A
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
703
APPENDIX B
15)
Apply power to the system.
16)
Press the
ENT
Key to acknowledge the Power-Up Page.
17)
Turn the large
FMS
Knob to select the AUX Page group on the MFD.
18)
Turn the small
FMS
Knob to select the System Status Page.
19)
Press the Display Database Selection Softkey to show standby navigation database information for each display
(
MFD1 DB
,
PFD1 DB
). Verify the correct standby navigation database cycle information is shown for each
display.
Manually activating the standby navigation database:
1)
From the AUX-SYSTEM STATUS Page, select the
STANDBY DB
Softkey.
2)
A prompt similar to the following figure below is displayed, select ‘Yes’ to overwrite the Active Navigation
Database with the Standby Navigation Database. Select ‘No’ to cancel.
Figure B-7 Standby Nav Database Activation
Confirmation Window
3)
Remove power from the system.
4)
Apply power to the system.
5)
Press the
ENT
Key to acknowledge the Power-Up Page.
6)
Turn the large
FMS
Knob to select the AUX Page group on the MFD.
7)
Turn the small
FMS
Knob to select the System Status Page.
8)
Select the Display Database Selection Softkey to show navigation database information for each display (
MFD1
DB
,
PFD1 DB
). Verify the correct navigation database cycle information is shown for each display.
