190-00820-11 Rev. A
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
48
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Selecting an active profile:
1)
Use the
FMS
Knob to select the AUX - System Setup Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to highlight the active profile field in the Pilot Profile Box.
4)
Turn the small
FMS
Knob to display the pilot profile list and highlight the desired profile.
5)
Press the
ENT
Key. The system loads and displays the system settings for the selected profile.
Renaming a profile:
1)
Use the
FMS
Knob to select the AUX - System Setup Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to highlight ‘RENAME’ in the Pilot Profile Box.
4)
Press the
ENT
Key.
5)
In the ‘Rename Profile’ window, turn the
FMS
Knob to select the profile to rename.
6)
Press the
ENT
Key.
7)
Use the
FMS
Knob to enter a new profile name up to 16 characters long and press the
ENT
Key.
8)
With ‘RENAME’ highlighted, press the
ENT
Key.
9)
To cancel the process, use the large
FMS
Knob to select ‘CANCEL’ and press the ENT Key.
Deleting a profile:
1)
Use the
FMS
Knob to select the AUX - System Setup Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to highlight ‘DELETE’ in the Pilot Profile Box.
4)
Press the
ENT
Key.
5)
In the ‘Delete Profile’ window, turn the
FMS
Knob to select the profile to delete.
6)
Press the
ENT
Key.
7)
With ‘DELETE’ highlighted, press the
ENT
Key.
8)
To cancel the process, use the large
FMS
Knob to select ‘CANCEL’ and press the
ENT
Key.
If an SD card is inserted into the top slot of the MFD, pilot profiles may imported from the SD card into the
system, or exported from the system to the SD card.
Because system settings may vary from one airframe to another, always verify system settings from an
imported profile are consistent with the desired settings.
Importing a profile from an SD card:
1)
Insert an SD card containing the pilot profile(s) into the top card slot on the MFD.
2)
Turn the
FMS
Knob to select the AUX - System Setup Page.
3)
Select the
IMPORT
Softkey.
