190-00820-11 Rev. A
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
47
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
PILOT PROFILES
System settings may be saved under a pilot profile. When the system is powered on, the last selected
pilot profile is shown on the MFD Power-up Page (Figure 1-15). The system can store up to 25 profiles; the
currently active profile, the number of profiles used, and the number of profiles available are shown at the top
of the System Setup Page in the box labeled ‘Pilot Profile’. From here, pilot profiles may be created, selected,
renamed, or deleted. Pilot profiles may also be exported from the system to an SD card, or imported from an
SD card into the system.
Figure 1-36 Pilot Profiles
(AUX - System Setup Page)
Creating a profile:
1)
Use the
FMS
Knob to select the AUX - System Setup Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to highlight ‘CREATE’ in the Pilot Profile Box.
4)
Press the
ENT
Key. A ‘Create Profile’ window is displayed.
5)
Use the
FMS
Knob to enter a profile name up to 16 characters long and press the
ENT
Key. Pilot profile names
cannot begin with a blank as the first letter.
6)
In the next field, use the small
FMS
Knob to select the desired settings upon which to base the new profile.
Profiles can be created based on Garmin factory defaults, default profile settings (initially based on Garmin
factory defaults unless edited by the pilot), or current system settings.
7)
Press the
ENT
Key.
8)
With ‘CREATE’ highlighted, press the
ENT
Key to create the profile
Or
:
Use the large
FMS
Knob to select ‘CREATE and ACTIVATE’ and press the
ENT
Key to activate the new profile.
9)
To cancel the process, select ‘CANCEL’ with the large FMS Knob and press the
ENT
Key.
