Garmin Cirrus Perspective SR22T, Reference Manual

Page: 122 / 192

Cirrus Perspective ™ by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
190-00821-09 Rev. A
104
Additional Features
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal Oper
ation
Annun/
Alerts
Appendix
Index
Immediately Accessing Emergency Procedures
1)
From any page on the MFD, press the
CHKLIST
Softkey.
2)
Press the
EMERGCY
Softkey.
3)
Turn the FMS Knob to select the desired emergency checklist and press the
ENT
Key.
4)
Press the ENT Key or CHECK Softkey to check the selected emergency
checklist item. The line item turns green and a checkmark is placed in the
box next to it. The next line item is automatically highlighted for checking.
Either
FMS
Knob can be used to scroll through the checklist and select the
desired checklist item.
Press the
CLR
Key or
UNCHECK
Softkey to remove a check mark from an
item.
5)
When all checklist items have been checked, ‘*Checklist Finished*’ is
displayed in green text at the bottom left of the checklist window. If all
items in the checklist have not been checked, ‘*CHECKLIST NOT FINISHED*’
will be displayed in yellow text.
6) Press the ENT Key. ‘GO TO NEXT CHECKLIST?’ will be highlighted by the
cursor.
7) Press the ENT Key to advance to the next checklist.
8)
Press the
RETURN
Softkey to return to the previous checklist.
9)
Press the
EXIT
Softkey to exit the Checklist Page and return to the page
last viewed.
HYPOXIA RECOGNITION WITH AUTOMATIC DESCENT MODE (OPTIONAL)
NOTE:
The Automatic Descent Mode does not account for terrain elevation.
The system is operative when the aircraft altitude is above 14,900 feet (pressure
altitude) and the GFC 700 autopilot is engaged. Pilot interaction with the Perspective
™
system is monitored by detecting key presses and turns of the knobs (Audio Panel and
push-to-talk switch excluded). If a period of inactivity (time dependent on altitude) is
detected, Hypoxia Recognition initiates and automatic descent.
When the system detects a sufficient period of inactivity the Advisory Annunciation
‘ARE YOU ALERT?’ is displayed. Selecting the ALERT Softkey will acknowledge the
message and reset the system. Pressing any other softkey, or turning a knob will also
reset the system.