Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
190-00600-02 Rev. A
73
Annunciations & Alerts
Flight
Instruments
EICAS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal
Oper
ation
Annun/
Alerts
Appendix
Index
gmC 710 messAge Advisories
Message
Comments
GMC CONFIG
– GMC Config error.
Config service req’d.
Error in the configuration of the GMC 710.
GMC FAIL
– GMC is inoperative.
A failure has been detected in the GMC 710.
The GMC 710 is unavailable.
MANIFEST
– GMC software
mismatch. Communication halted.
The GMC 710 has incorrect software installed.
The G1000 system should be serviced.
GMC KEYSTK
– GMC [key name]
Key is stuck.
A key is stuck on the GMC 710 bezel. Attempt
to free the stuck key by pressing it several
times. The G1000 system should be serviced if
the problem persists.
misCellAneous messAge Advisories
Message
Comments
FPL WPT LOCK
– Flight plan
waypoint is locked.
Upon power-up, the G1000 system detects
that a stored flight plan waypoint is locked.
This occurs when an aviation database update
eliminates an obsolete waypoint. The flight
plan cannot find the specified waypoint and
flags this message. This can also occur with
user waypoints in a flight plan that is deleted.
Remove the waypoint from the flight plan if it
no longer exists in any database,
Or
update the waypoint name/identifier to reflect
the new information.
FPL WPT MOVE
– Flight plan
waypoint moved.
The system has detected that a waypoint
coordinate has changed due to a new aviation
database update. Verify that stored flight plans
contain correct waypoint locations.
TIMER EXPIRD
– Timer has expired. The system notifies the pilot that the timer has
expired.
Summary of Contents for Cessna Caravan G1000
Page 1: ...G1000 Integrated Flight Deck Cockpit Reference Guide for the Cessna Citation Mustang...
Page 2: ......
Page 4: ......
Page 105: ......