190-02692-00 Rev. A
Garmin G100 Pilot’s Guide for the Piper PA-32 Saratoga
69
FLIGHT INSTRUMENTS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
Figure 2-31 Synthetic Vision Imagery
SVT OPERATION
SVT is activated from the PFD using the softkeys located along the bottom edge of the display. Selecting the
softkeys turns the related function on or off. When SVT is enabled, the pitch scale increments are reduced to
10 degrees up and 7.5 degrees down.
SVT functions are displayed on three levels of softkeys. The
PFD
Softkey leads into the PFD function
Softkeys, including Synthetic Vision. Selecting the
SYN VIS
Softkey displays the SVT feature softkeys. The
softkeys are labeled
PATHWAY
,
SYN TERR
,
HRZN HDG
, and
APTSIGNS
. The
BACK
Softkey returns to
the previous level of softkeys. Synthetic Terrain must be active before any other SVT feature may be activated.
HRZN HDG
,
APTSIGNS
, and
PATHWAY
Softkeys are only available when the
SYN TERR
Softkey
is activated (gray background with black text). After activating the
SYN TERR
Softkey, the
HRZN HDG
,
APTSIGNS
, and
PATHWAY
softkeys may be activated in any combination to display desired features. When
system power is cycled, the last selected state (on or off) of the
SYN TERR, HRZN HDG
,
APTSIGNS
, and
PATHWAY
softkeys is remembered by the system.
Activating and deactivating SVT:
1)
Press the
PFD
Softkey.
2)
Press the
SYN VIS
Softkey.
3)
Press the
SYN TERR
Softkey. The SVT display will cycle on or off with the
SYN TERR
Softkey.
Activating and deactivating Pathways:
1)
Press the
PFD
Softkey.
2)
Press the
SYN VIS
Softkey.
