190-02692-00 Rev. A
Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
309
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
SELECTING THE STORMSCOPE PAGE
Stormscope lightning data can be displayed at the ranges of 25 nm, 50 nm, 100 nm, and 200 nm.
Adjusting the Stormscope Map Range:
1)
Turn the large
FMS
Knob to select the Map Page Group.
2)
Turn the small
FMS
Knob to select the MAP - STORMSCOPE® Page.
3)
To change the map range, turn the
Joystick
clockwise to zoom out or counter-clockwise to zoom in.
Figure 6-52 MAP - STORMSCOPE® Page
Changing between ‘cell’ and ‘strike’ mode:
1)
Select the MAP - STORMSCOPE® Page.
2)
Press the
MODE
Softkey. The
CELL
and
STRIKE
softkeys are displayed.
3)
Press the
CELL
Softkey to display ‘CELL’ data or press the
STRIKE
Softkey to display ‘STRIKE’ data. ‘CELL’ or
‘STRIKE’ is displayed in the mode box in the upper left corner of the Stormscope Page.
4)
Press the
BACK
Softkey to return to the MAP - STORMSCOPE® Page.
Or
:
1)
Select the MAP - STORMSCOPE® Page.
2)
Press the
MENU
Key.
3)
Turn the
small
FMS
Knob to choose between ‘CELL’ and ‘STRIKE’ options.
4)
When an item is selected, press the
ENT
Key.
If heading input is lost, strikes and/or cells must be cleared manually after the execution of each turn. This is
to ensure the strike and/or cell positions are depicted accurately in relation to the nose of the aircraft.
