Garmin Cessna Caravan G1000 Manual Download

Page: 629 / 724

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

190-00709-05 Rev. D

615

ADDITIONAL FEATURES

For event‑based messages:

Use the

FMS

Knob to enter the desired date (DD‑MM‑YY) and press the

ENT

Key.

Press the

ENT

Key again or use the large

FMS

Knob to move the cursor to the next field.

Use the

FMS

Knob to enter the desired time (HH:MM) and press the

ENT

Key.

10)

Press the

ENT

Key again or use the large

FMS

Knob to move the cursor to enter the next message.

Deleting a scheduler message:

Select the AUX ‑ Utility Page.

Press the

FMS

Knob momentarily to activate the flashing cursor.

Turn the large

FMS

Knob to

highlight the name field of the scheduler message to be deleted.

Press the

CLR

Key to clear the message text. If the

CLR

Key is pressed again, the message is restored.

Press the

ENT

Key while the message line is cleared to clear the message time.

Scheduler messages appear in the Messages Window on the PFD. When a scheduler message is waiting, the

MSG

Softkey label flashes. Selecting the

MSG

Softkey opens the Messages Window and acknowledges the

scheduler message. Pressing the

MSG

Softkey again removes the Messages Window from the display, and the

scheduler message is deleted from the message queue.

Figure 8-81 PFD Messages Window

Summary of Contents for Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands

Garmin Cessna Caravan G1000, Manual

Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands