Garmin Cessna Caravan G1000 Manual Download

Page: 604 / 724

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

190-00709-05 Rev. D

590

ADDITIONAL FEATURES

NOTE:

Do not maneuver the aircraft based solely upon the geo-referenced aircraft symbol.

FLITECHARTS SOFTKEYS

FliteCharts functions are displayed on three levels of softkeys. While on the Navigation Map Page, Nearest

Airports Page, or Flight Plan Page, selecting the

SHW CHRT

Softkey displays the available terminal chart and

advances to the chart selection level of softkeys:

CHRT OPT

CHRT

INFO-1/2

STAR

APR

, and

GO BACK

. The chart selection softkeys appear on the Airport Information Page.

Selecting the

GO BACK

Softkey reverts to the top level softkeys and previous page.

Selecting the

CHRT OPT

Softkey displays the available terminal chart and advances to the next level of

softkeys:

ALL

FIT WDTH

FULL SCN

, and

BACK

While viewing the

CHRT OPT

Softkeys, after 45 seconds of softkey inactivity, the system reverts to the chart

selection softkeys.

NOTAMs are not available with FliteCharts. The NOTAM Softkey label appears subdued and is disabled.

Figure 8-50 FliteCharts SHW CHRT, Chart Selection, and Chart Option Softkeys

Selecting the

GO BACK

Softkey returns

to the top-level softkeys and previous page.

Selecting the

BACK

Softkey returns

to the Chart Selection Softkeys.

ALL

GO BACK

SHW CHRT

APR

STAR

CHRT

CHRT OPT

FIT WDTH FULL SCN

BACK

INFO-1

INFO-2

CPDLC

SYSTEM

Summary of Contents for Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands

Garmin Cessna Caravan G1000, Manual

Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands