Garmin Cessna Caravan G1000 Manual Download

Page: 48 / 724

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

190-00709-05 Rev. D

SYSTEM OVERVIEW

1.7 ACCESSING G1000 FUNCTIONALITY

MENUS

The G1000 has a

MENU

Key that, when pressed, displays a context-sensitive list of options.

This options list

allows the user to access additional features or make settings changes which specifically relate to the currently displayed
window/page.

There is no all-encompassing menu.

Some menus provide access to additional submenus that are used

to view, edit, select, and review options. Menus display ‘NO OPTIONS’ when there are no options for the window/page
selected.

The main controls used in association with all window/page group operations are described in section

1.3. Softkey selection does not display menus or submenus.

To navigate the Page Menu Window:

Press the

MENU

Key to display the Page Menu Window.

Turn the

FMS

Knob to scroll through a list of available options (a scroll bar appears to the right of the window

when the option list is longer than the window).

Press the

ENT

Key to select the desired option.

The

CLR

Key may be pressed to remove the menu and cancel the operation. Pressing the

FMS

Knob also

removes the displayed menu.

Figure 1-23 Page Menu Examples

No Options with

NRST Window

Displayed on the

PFD

Options

with FPL

Window

Displayed

Summary of Contents for Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands

Garmin Cessna Caravan G1000, Manual

Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands