Garmin Cessna Caravan G1000 Manual Download

Page: 296 / 724

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

190-00709-05 Rev. D

282

FLIGHT MANAGEMENT

Viewing available approaches at an airport:

From the Airport Information Page (first page in the WPT group), press the

APR

Softkey. The Approach

Information Page is displayed, defaulting to the airport displayed on the Airport information Page.

To select another airport, press the

FMS

Knob to activate the cursor, enter an identifier/facility name/city, and

press the

ENT

Key.

Press the

FMS

Knob, then turn the large

FMS

Knob to highlight the Approach. The approach is previewed on

the map.

Turn the small

FMS

Knob to view the available approaches. Press the

ENT

Key to select the approach. The

cursor moves to the Transition box. The approach is previewed on the map.

Turn the small

FMS

Knob to view the available transitions. Press the

ENT

Key to select the transition. The cursor

moves to the Minimums box. The approach is previewed on the map.

Turn the small

FMS

Knob to select minimums on or off. Press the

ENT

Key.

When minimums are selected on, the cursor moves to the minimum altitude field . Use the small

FMS

Knob to

select the altitude. Press the

ENT

Key.

If temperature compensated minimums was selected, the cursor moves to the temperature field. Use the small

FMS

Knob to select the temperature. Press the

ENT

Key. The cursor moves to the Sequence box. The approach

is previewed on the map.

When minimums are selected off, the cursor moves to the Sequence box. The approach is previewed on the
map.

Press the

INFO-1

or the

INFO-2

Softkey to return to the Airport Information Page.

Loading an approach into the active flight plan from the Nearest Airport Page:

Select the Nearest Airports Page.

Press the

FMS

Knob, then turn the large

FMS

Knob to highlight the desired nearest airport. The airport is

previewed on the map.

Press the

APR

Softkey; or press the

MENU

Key, highlight ‘Select Approach Window’, and press the

ENT

Key.

Turn the

FMS

Knob to highlight the desired approach.

Press the

LD APR

Softkey; or press the

MENU

Key, highlight ‘Load Approach’, and press the

ENT

Key. The

Approach Loading Page is displayed with the transitions field highlighted.

Turn the

FMS

Knob to highlight the desired transition, and press the

ENT

Key.

Minimums

To set ‘MINIMUMS’, turn the small

FMS

Knob to select ‘BARO’, ‘RAD ALT’, or ‘TEMP COMP’, and press the

ENT

Key. Turn the small

FMS

Knob to select the altitude, and press the

ENT

Key.

If ‘TEMP COMP’ was selected, the cursor moves to the temperature field. Turn the small

FMS

Knob to select the

temperature, and press the

ENT

Key.

To skip setting minimums, press the

ENT

Key. The ‘LOAD?’ field is highlighted.

Summary of Contents for Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands

Garmin Cessna Caravan G1000, Manual

Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands