Garmin Cessna Caravan G1000 Manual Download

Page: 292 / 724

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

190-00709-05 Rev. D

278

FLIGHT MANAGEMENT

Figure 5-98 Arrival Loading

Loaded Arrival

Selected Arrival

Procedure Loading Page Selection Softkeys

Viewing available arrivals at an airport:

From the Airport Information Page (first page in the WPT group), select the

STAR

Softkey. The Arrival Information

Page is displayed, defaulting to the airport displayed on the Airport Information Page.

To select another airport, press the

FMS

Knob to activate the cursor, enter an identifier/facility name/city, and

press the

ENT

Key.

Turn the large

FMS

Knob to highlight the Arrival. The arrival is previewed on the map.

Turn the small

FMS

Knob to view the available arrivals. Press the

ENT

Key to select the arrival. The cursor moves

to the Transition box. The arrival is previewed on the map.

Turn the small

FMS

Knob to view the available transitions. Press the

ENT

Key to select the transition. The cursor

moves to the Runway box. The arrival is previewed on the map.

Turn the small

FMS

Knob to view the available runways. Press the

ENT

Key to select the runway. The cursor

moves to the Sequence box. The arrival is previewed on the map.

Select the

INFO-x

Softkey to return to the Airport Information Page.

REMOVING AN ARRIVAL FROM THE ACTIVE FLIGHT PLAN

When plans change while flying IFR, arrivals can be easily removed from the Active Flight Plan.

Removing an arrival from the active flight plan:

Press the

FPL

Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD)

Press the

MENU

Key, and highlight ‘Remove Arrival’.

Summary of Contents for Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands

Garmin Cessna Caravan G1000, Manual

Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands