manualshive.com logo in svg

Garmin Cessna Caravan G1000, Manual

Share
Download
Garmin Cessna Caravan G1000 Manual Download Page 228

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

190-00709-05  Rev. D

214

FLIGHT MANAGEMENT

USER WAYPOINTS

The G1000 can create and store up to 1,000 user-defined waypoints.  User waypoints can be created from any 

map page (except PFD Inset Map, AUX-Trip Planning Page, or Procedure Pages) by selecting a position on the 
map using the 

Joystick

, or from the User Waypoint Information Page by referencing a bearing/distance from 

an existing waypoint, bearings from two existing waypoints, or latitude and longitude.  Once a waypoint has 
been created, it can be renamed, deleted, or moved.  Temporary user waypoints are erased upon system power 
down. 

Figure 5-45  User Waypoint Information Page

Selected User 

Waypoint

Navigation Map

Showing Selected 

User Waypoint

User Waypoint Info

 - Identifier

 - Temporary/Normal

 - Waypoint Type

User Waypoint List

 - Identifier

 - Comment

Reference Wpt/Info

 - Identifier/Rad/Dist or

 - Identifiers/Radials or

 - Region/Lat/Long

Softkeys

User Wpt Comment

# User Wpts Used

Displayed if User Wpt 

was created on map 

page

Selecting a User Waypoint:

1) 

With the User Waypoint Information Page displayed, enter the name of the User Waypoint, or scroll to the 
desired waypoint in the User Waypoint List using the large 

FMS

 Knob.

2) 

Press the 

ENT

 Key.

3) 

Press the 

FMS

 Knob to remove the flashing cursor.

 Or

:

1) 

With the Nearest User Waypoints Page displayed, press the 

FMS

 Knob.

2) 

Press the 

ENT

 Key or turn either 

FMS

 Knob to select an identifier in the Nearest USR Box.

3) 

Press the 

FMS

 Knob to remove the flashing cursor.

Summary of Contents for Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands