Garmin Cessna Caravan G1000 Page 209 Manual Download

Page: 209 / 724

190-00709-05 Rev. D

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

195

FLIGHT MANAGEMENT

Figure 5-25 Navigation Map Setup Menu - TRACK VECTOR, WIND VECTOR, NAV RANGE RING,

FUEL RNG (RSV), FIELD OF VIEW, SEL ALT ARC Setup

Track Vector

- On/Off

- Look Ahead Time

Fuel Range

- On/Off

- Fuel Reserve Time

Wind Vector On/Off

Nav Range Ring On/Off

SVT Field of View On/Off

Selected Altitude Arc On/Off

WIND VECTOR

The map displays a wind vector arrow in the upper right-hand portion of the screen. Wind vector information

is displayed as a white arrow pointing in the direction in which the wind is moving for wind speeds greater than
or equal to 1 kt.

Figure 5-26 Navigation Map - Wind Vector

Wind Direction

Wind Speed

NOTE:

The wind vector is not displayed until the aircraft is moving. It is not displayed on the Waypoint

Information pages.

Displaying/removing the wind vector:

Press the

MENU

Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.

Press the

ENT

Key. The Map Setup Menu is displayed.

Select the ‘Map’ group.

Press the

ENT

Key.

Highlight the ‘WIND VECTOR’ field.

Select ‘On’ or ‘Off’.

Press the

FMS

Knob to return to the Navigation Map Page.

Summary of Contents for Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands

Garmin Cessna Caravan G1000, Manual

Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands