Garmin Cessna Caravan G1000, Cockpit Reference Manual, Page: 89 / 96

Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R
12-13
SECTION 12 – ANNUNCIATIONS
& ALERTS
GMU 44 Message Advisories
Alerts Window Message Comments
HDG FAULT – A magnetometer fault
has occurred.
A fault has occurred in the GMU 44. Heading is flagged as invalid. The AHRS uses
GPS for backup mode operation. The G1000 system should be serviced.
MANIFEST
– GMU1 software
mismatch. Communication halted.
The GMU 44 has incorrect software installed. The G1000 system should be serviced.
GDL 69 Message Advisories
Alerts Window Message Comments
GDL69 CONFIG
– GDL 69 configura-
tion error. Config service req’d.
GDL 69 configuration settings do not match those of backup configuration memory.
The G1000 system should be serviced.
GDL69 FAIL
– GDL 69 has failed. A failure has been detected in the GDL 69. The receiver is unavailable. The G1000
system should be serviced
GDC 74A Message Advisories
Alerts Window Message Comments
GDC1 CONFIG
– GDC1 configuration
error. Config service req’d.
GDC 74A configuration settings do not match those of backup configuration
memory. The G1000 system should be serviced.
MANIFEST – GDC1 software
mismatch. Communication halted.
The GDC 74A has incorrect software installed. The G1000 system should be
serviced.
BACKUP PATH – Airdata using backup
data path.
The GDC 74A is using a backup communications data path. The G1000 system
should be serviced when possible.