background image

• To put the device in power saving mode, press the power key 

while the device is on.
While in power saving mode, the screen is off and the device 

uses very little power, but it can wake instantly for use.

TIP: 

You can charge your device faster by putting it in power 

saving mode while charging the battery.

• To turn off the device completely, hold the power key until a 

prompt appears on the screen, and select 

Power Off

.

Acquiring GPS Signals

When you turn on your navigation device, the GPS receiver 

must collect satellite data and establish the current location. The 

time required to acquire satellite signals varies based on several 

factors, including how far you are from the location where you 

last used your navigation device, whether you have a clear view 

of the sky, and how long it has been since you last used your 

navigation device. The first time you turn on your navigation 

device, it may take several minutes to acquire satellite signals.

1

Turn on the device.

2

Verify   appears in the status bar, and enable location 

services if it does not.

3

If necessary, go to an open area with a clear view of the sky, 

away from tall buildings and trees.
Acquiring Satellites appears at the top of the navigation map 

until the device determines your location.

Home Screen

NOTE: 

The home screen layout may vary if it has been 

customized.

Swipe down to view notifications.
Swipe down twice to quickly change settings and backlight 
brightness.
Hold to customize the wallpaper or add widgets to the home 
screen.
Select to open the app drawer. The app drawer contains shortcuts 
to all the apps installed on your device.

Opening an App

The home screen contains shortcuts for frequently used apps. 

The app drawer contains all the apps installed on your device, 

organized into two tabs. The Navigation tab contains Garmin 

apps useful for navigation, dispatching, and hours of service 

recording. The Tools tab contains apps useful for 

communication and other tasks.

Select an option to open an app:

• Select an app shortcut from the home screen.
• Select  , select a tab, and select an app.

Adding Shortcuts to the Home Screen

1

Select  .

2

Select an app tab to view additional applications.

3

Hold an application, and drag it to a location on the home 

screen.

Viewing Notifications

1

Swipe down from the top of the screen.
The list of notifications appears.

2

Select an option:
• To launch the action or app mentioned in the notification, 

select the notification.

• To dismiss a notification, swipe the notification to the right.

Status Bar Icons

The status bar is located at the top of the main menu. The status 

bar icons display information about features on the device.

Location services is enabled.
Bluetooth

®

 technology is enabled.

Connected to a Bluetooth device.
Connected to a Wi

Fi

®

 network (

Connecting to a Wireless Network

page 21

).

Active vehicle profile. Swipe down twice and select to view the 
vehicle profile settings.
Battery charge level.

Using the Touchscreen

• Tap the screen to select an item.
• Drag or swipe your finger across the screen to pan or scroll.
• Pinch two fingers together to zoom out.
• Spread two fingers apart to zoom in.

Adjusting the Screen Brightness

The device uses an ambient light sensor to adjust the screen 

brightness to your vehicle conditions automatically. You can also 

adjust the brightness manually, using either the notification 

panel or the settings menu.

1

Select an option:
• Swipe down twice from the top of the screen to expand 

the quick settings in the notification panel.

• Select 

Settings

 > 

Display

 > 

Brightness Level

.

2

Use the slider bar to adjust the brightness.

Vehicle Profiles

 WARNING

Entering your vehicle profile characteristics does not guarantee 

that your vehicle's characteristics will be accounted for in all 

route suggestions or that you will receive the warning icons in all 

cases. Limitations may exist in the map data such that your 

device cannot account for these restrictions or road conditions in 

all cases. Always defer to all posted road signs and road 

conditions when making driving decisions.

Routing and navigation are calculated differently based on your 

vehicle profile. The activated vehicle profile is indicated by an 

icon in the status bar. The navigation and map settings on your 

device can be customized separately for each vehicle type.
When you activate a camper vehicle profile, the device avoids 

including restricted or impassable areas in routes based on the 

dimensions, weight, and other characteristics you entered for 

your vehicle.

2

Vehicle Profiles

Summary of Contents for Camper 785



































Reviews: