Garmin Beechcraft 200 Series, Cockpit Reference Manual

Page: 95 / 270

Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B 71
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
ARRIVALS
Loading an Arrival into the Active Flight Plan
Loading an arrival into the active flight plan using the PROC Key:
1)
Press the
PROC
Key. The ‘Procedures’ Window is displayed.
2)
Highlight ‘Select Arrival’.
3) Press the ENT Key. The ‘PROC - Arrival Loading’ Page is displayed.
4) Use the FMS Knob to select an airport and press the ENT Key.
5)
Select an arrival from the list and press the
ENT
Key.
6)
Select a transition (if required) and press the
ENT
Key.
7)
Select a runway (if required) and press the ENT Key. ‘Load?’ is highlighted.
8) Press the ENT Key to load the arrival procedure
Loading an arrival into the active flight plan from the ‘WPT -
Arrival Information’ Page:
1)
From the ‘WPT - Airport Information’ Page (first page in the WPT group),
press the
STAR Softkey. The ‘WPT - Arrival Information’ Page is displayed,
defaulting to the airport displayed on the ‘WPT - Airport Information’ Page.
2) To select another airport, press the FMS Knob to activate the cursor, enter
an identifier/facility name/city, and press the ENT Key.
3) Select a different arrival, if desired.
a)
Turn the large
FMS
Knob to highlight the arrival. The arrival is
previewed on the map.
b)
Turn the small
FMS
Knob to view the available arrivals. Press the
ENT
Key to select the arrival. The cursor moves to the ‘Transition’ Box (only
if there are available transitions). The arrival is previewed on the map.
c) Turn the small FMS Knob to view the available transitions. Press the
ENT Key to select the transition. The cursor moves to the ‘Runway’
Box. The arrival is previewed on the map.
d) Turn the small FMS Knob to view the available runways. Press the ENT
Key to select the runway. The cursor moves to the ‘Sequence’ Box. The
arrival is previewed on the map.
4)
Press the MENU Key to display the Arrival Information ‘Page Menu’
Window.