Garmin Beechcraft 200 Series, Cockpit Reference Manual

Page: 92 / 270

Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B 68
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
5)
Turn the
FMS
Knobs, as required, to highlight a runway or transition. Press
the
ENT
Key to select the runway or transition. The cursor moves to the
next box. The procedure is previewed on the map.
6)
Repeat Step 5, until desired information has been viewed for the chosen
procedure.
7)
Press the
Info 1
Softkey or the
Info 2
Softkey to return to the ‘WPT -
Airport Information’ Page.
DEPARTURES
Loading a Departure into the Active Flight Plan
Loading a departure into the active flight plan using the PROC
Key:
1) Press the PROC Key. The ‘Procedures’ Window is displayed.
2)
Highlight ‘Select Departure’.
3)
Press the
ENT
Key. The ‘PROC - Departure Loading’ Page is displayed.
4)
Use the FMS Knob to select an airport and press the ENT Key.
5) Select a departure from the list and press the ENT Key.
6) Select a runway (if required) and press the ENT Key.
7)
Select a transition (if required) and press the
ENT
Key. ‘Load?’ is
highlighted.
8)
Press the
ENT
Key to load the departure procedure.
Loading a departure into the active flight plan from the ‘WPT -
Departure Information’ Page:
1)
From the ‘WPT - Airport Information’ Page (first page in the WPT group),
press the
DP
Softkey. The ‘WPT - Departure Information’ Page is displayed,
defaulting to the airport displayed on the ‘WPT - Airport information’ Page.
2)
To select another airport, press the
FMS
Knob to activate the cursor, enter
an identifier/facility name/city, and press the
ENT
Key.
3)
Select a different departure, if desired.
a)
Turn the large FMS Knob to highlight the Departure. The departure is
previewed on the map.
b)
Turn the small FMS Knob to view the available departures. Press the
ENT
Key to select the departure. The cursor moves to the ‘Runway’
Box. The departure is previewed on the map.