Garmin Beechcraft 200 Series, Cockpit Reference Manual

Page: 74 / 270

Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B 50
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
5)
To change the waypoint back to a fly-by waypoint, highlight the desired
waypoint. Press the
MENU
Key, highlight ‘Set Fly-By Waypoint’, and press
the ENT Key. The ‘Set <waypoint> to be a fly-by waypoint?’ Window is
displayed. With ‘OK’ highlighted, press the ENT Key.
Flight Plan Airways
Adding an airway to the active flight plan:
1) Press the FPL Key.
2) Press the FMS Knob to activate the cursor (not required on the PFD).
3)
Turn the large
FMS
Knob to highlight the waypoint after the desired airway
entry point. If this waypoint is not a valid airway entry point, a valid entry
point should be entered at this time.
4) Turn the small FMS Knob one click clockwise and press the LD AIRWY
Softkey (MFD only), or press the MENU Key and select “Load Airway”.
The ‘FPL - Select Airway’ Page is displayed. The LD AIRWY Softkey or
the “Load Airway” menu item is available only when a valid airway entry
waypoint has been chosen (the waypoint ahead of the cursor position).
5)
Turn the
FMS
Knob to select the desired airway from the list, and press the
ENT
Key. Low altitude airways are shown first in the list, followed by “all”
altitude airways, and then high altitude airways.
6)
Turn the
FMS
Knob to select the desired airway exit point from the list, and
press the ENT Key. ‘Load?’ is highlighted.
7)
Press the
ENT
Key. The system returns to editing the flight plan with the
new airway inserted.
Adding an airway to a stored flight plan:
1)
On the ‘FPL - Flight Plan Catalog’ Page, press the FMS Knob to activate the
cursor.
2)
Highlight the desired flight plan.
3) Press the EDIT Softkey; or press the ENT Key, turn the large FMS Knob
clockwise to select “EDIT” and press the ENT Key. The ‘FPL - Stored Flight
Plan’ Page is displayed.
4)
Turn the large FMS Knob to highlight the waypoint after the desired airway
entry point. If this waypoint is not a valid airway entry point, a valid entry
point should be entered at this time.