Garmin Beechcraft 200 Series, Cockpit Reference Manual

Page: 42 / 270

Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B 18
Nav/Com/XPDR/Audio Panel
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
GTX 3000 TCAS II Transponder Mode Selection (optional)
Selecting a transponder mode:
1)
Press the
XPDR/TFC
Softkey.
2)
Press the
MODE
Softkey to display the Transponder Mode Selection Softkeys.
3)
Press the desired softkey to activate the transponder mode (STBY, On, or
ALT).
Selecting a TCAS II mode:
1) Press the XPDR/TFC Softkey.
2)
Press the
MODE
Softkey to display the TCAS II Mode Selection Softkeys.
3)
Press the desired softkey to activate the TCAS II mode (TA Only or TA/RA).
Entering a transponder code with softkeys:
1)
Press the
XPDR
or
XPDR/TFC
Softkey to display the Transponder Mode
Selection Softkeys.
2)
Press the
Code
Softkey to display the Transponder Code Selection Softkeys,
for digit entry.
3)
Press the digit softkeys to enter the code in the code field. When entering
the code, the next softkey in sequence must be selected within 10 seconds,
or the entry is cancelled and restored to the previous code. Pressing the
BKSP
Softkey moves the code selection cursor to the previous digit. Five
seconds after the fourth digit has been entered, the transponder code
becomes active.
Entering a transponder code with the PFD FMS Knob:
1) Press the XPDR or XPDR/TFC and the Code Softkeys as in the previous
procedure to enable code entry.
2) Turn the small FMS Knob to enter the first two code digits.
3) Turn the large FMS Knob to move the cursor to the next code field.
4)
Enter the last two code digits with the small
FMS
Knob.
5)
Press the
ENT
Key to complete code digit entry.
Entering a transponder code with the PFD/MFD Controller:
1)
Press the
XPDR
Key to select the transponder code field.