Garmin Beechcraft 200 Series, Cockpit Reference Manual

Page: 227 / 270

Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B 203
Annunciations & Alerts
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Message Comments
GEA1 MANIFEST
– GEA1 software
mismatch, communication halted.
The #1 GEA has incorrect software installed. The system should
be serviced.
GEA2 CONFIG
– GEA2 config error.
Config service req’d.
The GEA2 configuration settings do not match those of backup
configuration memory. The system should be serviced.
GEA2 MANIFEST – GEA2 software
mismatch, communication halted.
The #2 GEA has incorrect software installed. The system should
be serviced.
GEO LIMITS – AHRS1 too far North/
South, no magnetic compass.
The aircraft is outside geographical limits for approved AHRS
operation. Heading is flagged as invalid.
GEO LIMITS
– AHRS2 too far North/
South, no magnetic compass.
GFC MANIFEST
– GFC software
mismatch, communication halted.
Incorrect servo software is installed, or gain settings are
incorrect.
GIA #[1, 2] INOP - CRNT – Check
GIA current.
GIA 1 and/or GIA 2 current is low. The current should be
checked.
GIA #[1, 2] OVER TEMP – Check
GIA temperature.
GIA 1 and/or GIA 2 is reporting an over-temperature condition.
GIA #[1, 2] INOP - SERIAL
–
Check GIA serial communication.
Loss of GIA 1 and/or GIA 2 serial communication. Check GIA
serial communication.
GIA #[1, 2] INOP - VOLT
– Check
GIA voltage.
GIA 1 and/or GIA 2 low voltage. Check voltage.
GIA1 CONFIG – GIA1 audio config
error. Config service req’d.
The GIA1 have an error in the audio configuration. The system
should be serviced.
GIA1 CONFIG – GIA1 config error.
Config service req’d.
The GIA1 configuration settings do not match backup
configuration memory. The system should be serviced.
GIA1 COOLING
– GIA1
temperature too low.
The GIA1 and/or GIA2 temperature is too low to operate
correctly. Allow units to warm up to operating temperature.
GIA1 COOLING
– GIA1 over
temperature.
The GIA1 temperature is too high. If problem persists, the
system should be serviced.
GIA1 MANIFEST – GIA1 software
mismatch, communication halted.
The GIA1 1 has incorrect software installed. The system should
be serviced.
GIA1 SERVICE – GIA1 needs
service. Return the unit for repair.
The GIA1 self-test has detected a problem in the unit. The
system should be serviced.
GIA2 CONFIG
– GIA2 audio config
error. Config service req’d.
The GIA2 have an error in the audio configuration. The system
should be serviced.
GIA2 CONFIG
– GIA2 config error.
Config service req’d.
The GIA2 configuration settings do not match backup
configuration memory. The system should be serviced.