Garmin Beechcraft 200 Series, Cockpit Reference Manual

Page: 157 / 270

Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B 133
Hazard Avoidance
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
OPERATION
Switching from standby mode to TA Only or TA/RA mode on the
MFD:
1)
Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Traffic Map Page.
3) Press the TA Only Softkey or the TA/RA Softkey.
Switching from standby mode to TA Only or TA/RA mode on the
PFD:
1)
Press the
XPDR/TFC
Softkey.
2)
Press the MODE Softkey.
3) Press the TA Only Softkey or the TA/RA Softkey
Switching from TA Only or TA/RA mode to standby mode:
On the MFD:
1) Turn the large FMS Knob to select the Map Page Group.
2)
Turn the small
FMS Knob
to select the Traffic Map Page.
3)
Press the
TFC STBY
Softkey
Displaying traffic on the Traffic Map Page:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Traffic Map Page.
3) Press the TA Only Softkey or the TA/RA Softkey to begin displaying traffic.
‘TA ONLY’ or ‘TA/RA’ is displayed in the Traffic mode field.
4) Press the Relative Softkey or the Absolute Softkey to display the relative
or absolute altitude of other aircraft. When absolute altitude is displayed,
the system may revert to displaying relative altitude after 30 seconds if
the TCAS II system is providing altitude which is not corrected for the local
barometric pressure setting.
5)
Press the
TFC STBY
Softkey to place the system in the Standby mode.
‘STANDBY’ is displayed in the Traffic mode field.
6)
Turn the
Joystick
clockwise to display a larger area or counter-clockwise to
display a smaller area.