Garmin Beechcraft 200 Series, Cockpit Reference Manual

Page: 102 / 270

Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B 78
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
When GPS is not approved for the selected final approach course, the
message ‘- NOT APPROVED FOR GPS - GPS guidance is for monitoring only.
Load approach?’ is displayed. With ‘Yes’ highlighted, press the
ENT Key.
When a visual approach is selected, the message ‘Obstacle clearance is not
provided for visual approaches’ is displayed. With ‘OK’ highlighted, press
the
ENT Key.
Or :
1)
Press the
PROC
Key.
2)
Use the large
FMS
Knob to highlight ‘Select Approach’ and press the
ENT
Key.
3)
From the ‘PROC - Approach Loading’ Page, press the
MENU
Key on
the MFD. The ‘Page Menu’ Window is displayed with ‘Load & Activate
Approach’ highlighted.
4)
Press the
ENT
Key.
When GPS is not approved for the selected final approach course, the
message ‘- NOT APPROVED FOR GPS - GPS guidance is for monitoring only.
Load approach?’ is displayed. With ‘Yes’ highlighted, press the
ENT Key.
When a visual approach is selected, the message ‘Obstacle clearance is not
provided for visual approaches’ is displayed. With ‘OK’ highlighted, press
the
ENT Key.
Removing an Approach from the Flight Plan
Removing an approach from the active flight plan:
1) Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
2) Press the MENU Key, and highlight ‘Remove Approach’.
3) Press the ENT Key. A confirmation window is displayed listing the
approach procedure.
4) With ‘OK’ highlighted, press the ENT Key. To cancel the removal, highlight
‘CANCEL’ and press the ENT Key.
Or :
1)
Press the
FPL
Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
2)
Press the
FMS
Knob, and turn to highlight the approach header in the
active flight plan.