Garmin Beechcraft 200 Series, Cockpit Reference Manual

Page: 101 / 270

Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B 77
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Loading an approach procedure into a stored flight plan:
1) Select a stored flight plan from the ‘FPL - Flight Plan Catalog’ Page.
2)
Press the
Edit
Softkey; or press the
MENU
Key, select ‘Edit Flight Plan’, and
press the ENT Key. The ‘FPL - Stored Flight Plan’ Page is displayed.
3)
Press the
LD APR
Softkey; or press the
MENU
Key, select “Load
Approach”, and press the ENT Key. The ‘PROC - Approach Loading’ Page is
displayed.
4) Select the airport and approach:
a)
Use the
FMS
Knob to select an airport and press the
ENT
Key.
b)
Select an approach from the list and press the
ENT
Key.
Or
:
a) If necessary, push the FMS Knob to exit the approach list, and use the
large FMS Knob to move the cursor to the Approach ‘Channel’ Field.
b) Use the FMS Knob to enter the approach channel number, and press
the ENT Key to accept the approach channel number. The airport and
approach are selected.
5)
Select a transition for the selected approach. Press the ENT Key.
6) Press the ENT Key to load the selected approach procedure.
Activating an Approach
Activating a previously loaded approach:
1) Press the PROC Key. The ‘Procedures’ Window is displayed with ‘Activate
Approach’ highlighted.
2) Press the ENT Key to activate the approach.
Activating a previously loaded approach with vectors to final:
1)
Press the
PROC
Key to display the ‘Procedures’ Window.
2) Highlight ‘Activate Vector-to-Final’ and press the ENT Key.
Loading and activating an approach using the MENU Key:
1)
From the ‘PROC - Approach Loading’ Page, press the
MENU
Key. The ‘Page
Menu’ Window is displayed with ‘Load & Activate Approach’ highlighted.
2)
Press the
ENT
Key.