Garmin BC 50 NIGHT VISION, Owner'S Manual

Page: 5 / 10

Introduction
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Viewing the Backup Camera
WARNING
This device is intended to enhance your situational awareness when used properly. If used improperly, you
could become distracted by the display, which could lead to an accident causing serious personal injury or
death. Only access the information displayed on the device with a glance. Always maintain awareness of your
surroundings and do not stare at the display or become distracted by the display. Focusing on the display could
prevent you from avoiding obstacles or hazards.
Night vision is automatically activated when conditions are dark.
• If your camera is connected to a reverse lamp (recommended), place the vehicle into reverse.
• If your camera is connected to constant power, select
/ .
• To show or hide the camera view using voice commands, say OK Garmin, Show Video or Hide Video.
NOTE: Voice commands are not available on all navigation devices. The voice commands may vary based on
your navigation device model. This feature is not available for all languages or may require additional
navigation device setup for some languages. For more information, see the Voice Command app or the Voice
Control app on your navigation device, or the navigation device owner's manual.
Switching Cameras
When multiple backup cameras are transmitting to your device, you can switch between the views from the
cameras.
From the camera view, select an option:
• Select .
• Tap the screen, and select a camera at the bottom of the screen.
The video feed from the camera appears.
Pairing a BC 50 Night Vision Camera with a Garmin
®
Navigation
Device
You can pair the BC 50 Night Vision camera with a compatible Garmin navigation device. Go to garmin.com
/BC50 for more information about device compatibility.
1 Update your navigation device to the latest software.
Your device may not support the BC 50 Night Vision camera without the latest software. For more
information about updating the device software, see the owner's manual for your navigation device.
NOTE: The location of the camera app may vary by device model. See your navigation device owner's manual
for more information.
2 Select an option:
• Select Settings > Wireless Camera > Add New Camera > BC 50
• From the apps menu, select Tools > Wireless Camera >
> BC 50.
3 Follow the on-screen instructions to finish pairing and setting up the camera.
4 Select
or Save.
After you complete the pairing process with a camera for the first time, it connects automatically to the Garmin
navigation device when power is applied.
Introduction 1