34
AQUAMAP™ 10x2/12x2 SERIES
Tacking and Gybing from Wind Hold
Before you can engage wind hold, you must have a wind sensor installed.
1
Engage wind hold.
2
Press
MENU
.
3
Select an option.
The autopilot steers your boat through a tack or gybe, and information
about the progress of the tack or gybe appears on the screen.
Setting a Tack and Gybe Delay
The tack and gybe delay allows you to delay steering a tack and gybe after
you initiate the maneuver.
1
From the autopilot screen, select
MENU
>
Autopilot Setup
>
Sailing
Setup
>
Tack Delay
.
2
Select the length of the delay.
3
If necessary, select
Done
.
Enabling the Gybe Inhibitor
NOTE:
The gybe inhibitor does not prevent you from manually performing a
gybe using the helm or step steering.
The gybe inhibitor prevents the autopilot from performing a gybe.
1
From the autopilot screen, select
MENU
>
Autopilot Setup
>
Sailing
Setup
>
Gybe Inhibitor
.
2
Select
Enabled
.
Heading Line and Angle Markers
The heading line is an extension drawn on the map from the bow of the
boat in the direction of travel. Angle markers indicate relative position from
the heading or course over ground, which are helpful for casting or finding
reference points.
Setting the Heading and Course Over Ground Lines
You can show the heading line and the course over ground (COG) line on the
chart.
COG is your direction of movement. Heading is the direction the bow of the
boat is pointed, when a heading sensor is connected.
1
From a chart view, select
MENU
>
Chart Setup
>
Chart Appearance
>
Heading Line
.
2
If necessary, select
Source
, and select an option:
• To automatically use the source available, select
Auto
.
• To use the GPS antenna heading for COG, select
GPS Heading
(COG)
.
• To use data from a connected heading sensor, select
Heading
.
• To use data from both a connected heading sensor and the GPS
antenna, select
COG and Heading
.
This displays both the heading line and the COG line on the chart.
3
Select
Display
, and select an option:
• Select
Distance
>
Distance
, and enter the length of the line shown on
the chart.
• Select
Time
>
Time
, and enter the time used to calculate the distance
your boat will travel in the specified time at your present speed.
Turning on Angle Markers
You can add angle markers to the map along the heading line. Angle markers
can be helpful for casting when fishing.
1
Set the heading line.
2
Select
Angle Markers
.
