29
AQUAMAP™ 10x2/12x2 SERIES
result, the AQUAMAP may not reposition the Auto Guidance line, unless
the destination selected requires navigation through a narrow waterway.
8
Select an option:
• If the placement of the Auto Guidance line is satisfactory, select
MENU
>
Navigation Options
>
Stop Navigation
, and proceed to step 10.
• If the Auto Guidance line is too close to known obstacles, select
Settings
>
Preferences
>
Navigation
>
Auto Guidance
>
Shoreline
Distance
>
Farthest
.
• If the turns in the Auto Guidance line are too wide, select
Settings
>
Preferences
>
Navigation
>
Auto Guidance
>
Shoreline Distance
>
Nearest
.
9
If you selected
Nearest
or
Farthest
in step 8, review the placement of the
Auto Guidance
line, and determine whether the line safely avoids known
obstacles and the turns enable efficient travel.
Auto Guidance maintains a wide clearance from obstacles in open water,
even if you set the Shoreline Distance setting to Near or Nearest. As a
result, the AQUAMAP may not reposition the Auto Guidance line, unless
the destination selected requires navigation through a narrow waterway.
10
Repeat steps 3 through 9 at least once more, using a different destination
each time, until you are familiar with the functionality of the Shoreline
Distance setting.
Boundaries
Boundaries allow you to avoid or remain in designated areas in a body of
water. You can set an alarm to alert you when you enter or exit a boundary.
You can create boundary areas, lines, and circles using the map. You can
also convert saved tracks and routes into boundary lines. You can create a
boundary area using waypoints by creating a route from the waypoints, and
converting the route into a boundary line.
You can select a boundary to act as the active boundary. You can add the
active boundary data to the data fields on the chart.
Creating a Boundary
1
Select
NAV INFO
>
User Data
>
Boundaries
>
New
.
2
Select a boundary shape.
3
Follow the on-screen instructions.
Converting a Route to a Boundary
Before you can convert a route to a boundary, you must create and save at
least one route.
1
Select
NAV INFO
>
User Data
>
Routes
.
2
Select a route.
3
Select
Review
>
Edit Route
>
Save as Boundary
.
Converting a Track to a Boundary
Before you can convert a track to a boundary, you must record and save at
least one track.
1
Select
NAV INFO
>
User Data
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
SELECT
>
Edit Track
>
Save as Boundary
.
Editing a Boundary
1
Select
NAV INFO
>
User Data
>
Boundaries
.
2
Select a boundary.
3
Select
Review
>
Edit Boundary
.
4
Select an option:
• To edit the appearance of the boundary on the chart, select
Display
Options
.
• To change the boundary lines or name, select
Edit Boundary
.
