94
AQUAMAP™ 10x2/12x2 SERIES
AIS-EPIRB Test
: Enables test signals from Emergency Position Indicating
Radio Beacons (EPRIB).
AIS-MOB Test
: Enables test signals from man overboard (MOB) devices.
AIS-SART Test
: Enables test transmissions from Search and Rescue
Transponders (SART).
AIS Chinese Info.
: Enables AIS Chinese information.
Restoring the Original AQUAMAP Factory Settings
NOTE:
This procedure deletes all settings information you have entered.
1
Select
Settings
>
System
>
System Information
>
Factory Settings
.
2
Select an option.
Appendix
Registering Your Device
Help us better support you by completing our online registration today. Keep
the original sales receipt, or a photocopy, in a safe place.
1
Insert a memory card into the card slot on the AQUAMAP.
2
Wait a few moments.
The AQUAMAP creates a file named GarminDevice.xml in the Garmin
folder on the memory card.
3
Remove the memory card.
4
Insert the memory card into your computer.
5
On your computer, go to
6
Follow the on-screen instructions to download, install, and open the
Garmin Express™ application.
7
Select
Add a Device
.
8
While the application searches, select
Sign In
next to
Have marine
charts or devices?
near the bottom of the screen.
9
Create or sign in to your Garmin account.
10
Follow the on-screen instructions to set up your vessel.
11
Select
Add
.
The Garmin Express application searches the memory card for the device
information.
12
Select
Add Device
to register the device.
When registration is complete, the Garmin Express application searches
for additional charts and chart updates for your device.
When you add devices to the AQUAMAP network, repeat these steps to
register the new devices.
