Garmin Apollo SL50, User Manual

Page: 90 / 134

8. Turn the
Small
knob to go to the next Owner
Information page you want to edit.
9. Press
SEL
to start editing.
10. Select the characters with the Small knob and
move to the next character to the right by turning
the
Large
knob cw. Press
ENT
to save the
information.
GPS
Sensor
The GPS Sensor selection provides information
about GPS satellite health, the GPS satellites
available, information on each satellite, GPS Time,
and GPS Reset. See the Introduction to GPS section
on page 91.
1. In the System function, turn the
Large
knob to
reach the GPS Sensor page. Press ENT .
GPS Sensors: Press ENT
2. The GPS Health page is shown if GPS information
is received. The GPS number and dimension (2D,
3D, or no position), number of healthy, and number
of visible satellites are shown.
GPS 3D Pos Healthy: 25 Vis: 8
Y
3. Turn the
Small
knob to view the GPS Satellites
Used for Position fixes page. SV means space
vehicle, which is the same as a GPS satellite in
this case.
GPS SVs: 31,27,26,19,07,02
4. Turn the
Small
knob again to view the GPS
Satellite Status, Elevation, SNR, and Azimuth
page. Turn the
Small
knob to view information
about each available satellite.
80
System Functions
ENT
ENT
SEL