DRAFT
nüvi 705 Series Owner’s Manual
Getting Started
Step 1: Mount the nüvi
1. Plug the vehicle power cable into the power
connector on the right side of the cradle.
2. Snap the cradle onto the suction cup arm.
3. Clean and dry your windshield and the
suction cup with a lint-free cloth. Remove the
clear plastic from the suction cup. Place the
suction cup on the windshield.
4. Flip the lever back, toward the windshield.
5. Fit the bottom of your nüvi into the cradle.
6. Tilt the nüvi back until it snaps into place.
7. Plug the other end of the vehicle power cable
into a power outlet in your vehicle. Your unit
should turn on automatically if it is plugged in
and your vehicle is running.
8. If you are using a traffic receiver in Europe,
secure the traffic receiver’s antenna to the
windshield using the suction cups. (The traffic
receiver is included in some nüvi 715, 755T, 765, and 775 packages.)
Charging Your nüvi
Use the vehicle power cable.
Use the USB cable.
Use the AC adapter cable.
•
•
•
Cradle
Power cable
Suction cup mount
