Garmin 500W Series Pilot'S Manual & Reference Download

Page: 50 / 236

2 - NAV PAGES

190-00357-00 Rev G

6. To enable/disable the on-screen wind vector*:

Turn the

small right

knob to select “Map”

and press

ENT

. Use the

large right

knob to

highlight the “Wind Vector” field and turn the

small right

knob to select “On” or “Off”.

Press

ENT

to accept the selected option.

7. For airports, NAVAIDs, active flight plan

waypoints, user-created waypoints, state/pro-
vincial boundaries, rivers/lakes and cities: Turn
the

small right

knob to select the appropriate

“Group” name (per the chart on the previous
page) and press

ENT

. Use the

large right

knob to highlight the “RNG” field for the
desired feature and turn the

small right

knob

to select the maximum scale at which the fea-
ture should appear on screen. Or select “Off”
to never display the selected feature. Press

ENT

to accept the selected option. Next, turn

the

large right

knob to highlight the “TEXT”

field for the desired feature and turn the

small

right

knob to select the desired text size, or

select “Off” to disable text descriptions. Press

ENT

to accept the selected option.

8. For airspace boundaries, highways, roads,

railroad lines, active flight plan course lines,
and lat/long grid lines: Turn the

small right

knob to select the appropriate “Group” name
(per the chart on the previous page) and press

ENT

. Use the

large right

knob to highlight the

“RNG” field for the desired feature and turn
the

small right

knob to select the maximum

scale at which the feature should appear on
screen. Or select “Off” to never display the
selected feature. Press

ENT

to accept the

selected option.

Distance Measurements

The “Measure Dist?” option provides a quick, easy

method for determining the bearing and distance
between any two points on the map display.

To measure bearing and distance between two
points:

1. Press

MENU

(with the Map Page displayed).

2. Turn the

large right

knob to highlight “Mea-

sure Dist?” and press

ENT

. An on-screen

reference pointer appears on the map display
at your present position.

Once “Measure Dist?” is selected, place the

on-screen pointer on the point you wish to

measure FROM and press ENT.

3. Use the

small

and

large right

knobs to place

the reference pointer at the location you wish
to measure FROM and press

ENT

4. Again, use the

small

and

large right

knobs to

place the reference pointer at the location you
wish to measure TO. The bearing and distance
from the first reference location appear at the
top of the map display.

5. To exit the “Measure Dist?” option, press the

small right

knob.

Distance Measurements

Summary of Contents for 500W Series













































































































































































































































Search results

Summary of Contents for 500W Series

Reviews:

Related manuals for 500W Series

Brands by name

Popular brands

Garmin 500W Series, Pilot'S Manual & Reference

Search results

Summary of Contents for 500W Series

Reviews:

Related manuals for 500W Series

Brands by name

Popular brands