6 - WPT PAGES
139
190-00357-00 Rev G
User Waypoints
To select a VOR frequency from the VOR Page:
1. Select the VOR Page from the WPT page
group.
2. Press the
small right
knob
momentarily to
place the cursor on the VOR identifier field. If
you wish to select another VOR, use the
small
and
large right
knobs and press
ENT
when
finished.
3. Turn the
large right
knob to highlight the
frequency field and press
ENT
to place the
frequency in the standby field of the VLOC
window.
Using the large right knob, highlight the
VOR’s frequency and press ENT to place the
frequency in the standby VLOC frequency
field.
4. To activate the standby VLOC frequency, press
the
VLOC flip-flop
key.
User Waypoint Page
In addition to the airport, VOR, NDB and intersec-
tion information contained in your Jeppesen NavData
®
card, the 500W-series unit allows you to store up to
1,000 user-defined waypoints. The User Waypoint
Page displays the waypoint name (up to five charac-
ters long), identifier and radial from two reference
waypoints, distance from one reference waypoint,
along with the user waypoint’s latitude/longitude posi-
tion.
User Waypoint
Name
Reference Waypoint
Information
Tenth Page in
WPT Group
Create/Modify
Action Field
Latitude/Longitude
Position
To display information for a user waypoint,
highlight the name field. Then use the
small
and large right knobs to enter the waypoint
name.
Summary of Contents for 500W Series
