manualshive.com logo in svg

Garmin 500W Series, Pilot'S Manual & Reference

Share
Download
Garmin 500W Series Pilot'S Manual & Reference Download Page 132

6 - WPT PAGES

122

190-00357-00 Rev G

Finding the Desired Airport

Finding the Desired Airport

Your 500W-series unit uses ICAO identifiers for all 

airports. All U.S. airport identifiers which contain only 
letters use the prefix “K”. For example, Los Angeles 
International is KLAX under the ICAO standard. Other 
airports, such as Otten Memorial (3VS), that contain 
numbers in the identifier, do not require the “K” 
prefix. Alaska, Hawaii and many foreign countries use 
two letter prefixes.  

If you encounter difficulty when selecting an air-

port, try retrieving the desired airport using the facility 
name or the city in which it is located. 

After a WPT page is selected, information for a 

waypoint may be viewed by entering the identifier (or 
name) of the desired waypoint. 

Enter a waypoint identifier on the top line 

of any WPT page (using the small and large 

right knobs). Once entered, the database 

information for the selected waypoint is 

displayed. 

To enter a waypoint identifier: 

1.  Select  the  desired WPT  page  and  press  the 

small right 

knob to activate the cursor. 

2.  Turn the 

small right 

knob to select the first 

character of the waypoint’s identifier. 

3.  Turn the 

large right 

knob to select the next 

character field. 

4.  Turn the 

small right 

knob to select the desired 

character. 

5.  Repeat  steps  3  and  4  until  the  identifier  is 

selected, then press 

ENT

. 

6.  To remove the flashing cursor, press the 

small 

right 

knob. If duplicate waypoints exist, see 

the following pages for a description. 

Airports, NDBs and VORs may be selected by 

identifier, facility name or city location. 

Enter a waypoint’s facility name or city loca-

tion on the top or middle line of the “Facility, 

City & Region” data field (this option applies 

to airports, VORs and NDBs only). 

To enter a waypoint facility name or city location: 

1.  Select the Airport Location Page, NDB Page or 

VOR Page from the WPT page group. 

2.  Press  the 

small  right 

knob  to  activate  the 

cursor. 

3.  Turn the 

large right 

knob to select the facility 

name or location (city) field. 

4.  Turn the 

small right 

knob to select the desired 

character. 

5.  Turn the 

large right 

knob to select the next 

character field. 

6.  Repeat steps 4 and 5 until the facility name or 

location is selected, then press 

ENT

. 

Summary of Contents for 500W Series













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands