GVN 53 Owner’s Manual
c
hanGinG
the
S
ettinGS
Advanced Screen Settings
—these settings are intended
for installers only. If you inadvertently change these
settings, select
Restore Defaults
>
Yes
. You can also
press and hold the
thumb Stick
and the
8
key for 20
seconds. This will restore the default settings.
Serial Communication
This is intended for developers only. When
communicating serially with the unit, the gray (RX
In), purple (TX Out), and orange (Digital Gnd) wires
will be used. For more information about the serial
communication protocol, go to
.
Viewing Information �About�
Information �About�
Press
Menu
three times. Then select
About
.
Software
—the unit’s software version, audio version,
and unit ID are listed.
Detail Maps
—view information about the preloaded
detailed maps.
FM Traffic Receiver
—if you have a FM traffic receiver,
you can view the FM traffic receiver’s unit ID.
XM
—if you have an XM smart antenna, you can view
the XM antenna’s radio ID.
Restoring the Settings
To restore the navigation system to its original settings,
press
Menu
three times. Then select
Restore Defaults
>
Yes
.
Summary of Contents for 190-00832-00
Page 1: ...GVN 53 owner s manual...