GPSMAP 182/182C Owner’s Manual
25
B
ASIC
O
PERATION
>
DSC
Navigating to a Position Report or Distress Call
After a Position Report or a Distress Call is received, navigation
can be quickly set to the call location.
To navigate to Position Report or Distress Call:
1 Press the
NAV
key.
2. With
Go To
(MMSI/Name) highlighted, press
ENTER
.
Or
1. Highlight the call on the
Call List
or
Log
,
and press
NAV
.
2. With
Go To
(MMSI/Name) or (DSC) highlighted, press
ENTER.
Navigating to a DSC Call
Setting up DSC
The DSC Setup sub tab allows you to turn DSC
On
and
Off
.
This Setup tab also allows you to simulate Distress Calls and
Position Reports while the unit is in Simulator Mode (see page 3).
Simulating calls is helpful for practice before connecting to the real
system. The Distress Call simulator also helps to check if alarms
are working properly.
DSC Setup
Summary of Contents for 182/182C
Page 1: ...GPSMAP 182 182C chartplotting receiver owner s manual GPSMAP 182C shown...
Page 124: ......
Page 125: ......
