background image

Females

Percentile

20–29

30–39

40–49

50–59

60–69

70–79

Superior

95

49.6

47.4

45.3

41.1

37.8

36.7

Excellent

80

43.9

42.4

39.7

36.7

33

30.9

Good

60

39.5

37.8

36.3

33

30

28.1

Fair

40

36.1

34.4

33

30.1

27.5

25.9

Poor

0–40

<36.1

<34.4

<33

<30.1

<27.5

<25.9

Data reprinted with permission from The Cooper Institute. For more information, go to 

www.CooperInstitute.org

.

Viewing Your Predicted Race Times

Before you can view your projected race times (running only), 

you must put on a heart rate monitor and pair it with your device. 

For the most accurate estimate, complete the user profile setup 

(

Setting Up Your User Profile

), and set your maximum heart rate 

(

Setting Your Heart Rate Zones

). 

Your device uses the VO2 max. estimate (

About VO2 Max. 

Estimates

) and published data sources to provide a target race 

time based on your current state of fitness. This projection also 

presumes you have completed the proper training for the race.

NOTE: 

The projections may seem inaccurate at first. The device 

requires a few runs to learn about your running performance.

1

Put on your heart rate monitor, and go for a run.

2

Hold 

UP

.

3

Select 

My Stats

 > 

Race Predictor

.

Your projected race times appear for 5K, 10K, half marathon, 

and marathon distances.

Recovery Advisor

You can use your Garmin device paired with the heart rate 

monitor to display how much time remains before you are fully 

recovered and ready for the next hard workout. The recovery 

advisor feature includes recovery time and recovery check. 

Recovery advisor technology is provided and supported by 

Firstbeat Technologies Ltd.

Recovery check

: The recovery check provides a real-time 

indication of your state of recovery within the first several 

minutes of an activity.

Recovery time

: The recovery time appears immediately 

following an activity. The time counts down until it is optimal 

for you to attempt another hard workout.

Turning On the Recovery Advisor

Before you can use the recovery advisor feature, you must put 

on the heart rate monitor and pair it with your device (

Pairing 

ANT+ Sensors

). If your fēnix 3 was packaged with a heart rate 

monitor, the devices are already paired. For the most accurate 

estimate, you must complete the user profile setup (

Setting Up 

Your User Profile

), and set your maximum heart rate (

Setting 

Your Heart Rate Zones

).

1

Hold 

UP

.

2

Select 

My Stats

 > 

Recovery Advisor

 > 

Status

 > 

On

.

3

Go for a run.
Within the first several minutes of your run, a recovery check 

appears, showing your real-time state of recovery.

4

After your run, select 

Save

.

The recovery time appears. The maximum time is 4 days, 

and the minimum time is 6 hours.

Viewing Your Recovery Time

Before you can view your recovery time, you must enable the 

recovery advisor.

1

Hold 

UP

.

2

Select 

My Stats

 > 

Recovery Advisor

.

The recovery time appears. The maximum time is 4 days, 

and the minimum time is 6 hours.

About Training Effect

Training Effect measures the impact of an activity on your 

aerobic fitness. Training Effect accumulates during the activity. 

As the activity progresses, the training effect value increases, 

telling you how the activity has improved your fitness. Training 

Effect is determined by your user profile information, heart rate, 

duration, and intensity of your activity.
It is important to know that your Training Effect numbers (1.0–

5.0) may seem abnormally high during your first few runs. It 

takes several activities for the device to learn your aerobic 

fitness.

Training Effect Description

1.0–1.9

Helps recovery (short activities). Improves endurance 
with longer activities (more than 40 minutes).

2.0–2.9

Maintains your aerobic fitness.

3.0–3.9

Improves your aerobic fitness if repeated as part of 
your weekly training program.

4.0–4.9

Highly improves your aerobic fitness if repeated 1–2 
times per week with adequate recovery time.

5.0

Causes temporary overload with high improvement. 
Train up to this number with extreme care. Requires 
additional recovery days.

Training Effect technology is provided and supported by 

Firstbeat Technologies Ltd. For more information, go to 

www.firstbeattechnologies.com

.

Clock

Setting the Alarm

1

Hold 

UP

.

2

Select 

Clock

 > 

Alarm Clock

 > 

Status

 > 

On

.

3

Select 

Time

, and enter the alarm time.

4

If necessary, select 

Notification

, and select a type of 

notification.

Starting the Countdown Timer

1

Hold 

UP

.

2

Select 

Clock

 > 

Timer

.

3

Enter the time.

4

If necessary, select 

Restart

 > 

On

 to automatically restart the 

timer after it expires.

5

If necessary, select 

Notification

, and select a type of 

notification.

6

Select 

Start Timer

.

Using the Stopwatch

1

Hold 

UP

.

2

Select 

Clock

 > 

Stopwatch

.

3

From the clock, select 

START

.

Setting Sunrise and Sunset Alerts

You can set the sunrise and sunset alerts to sound a specific 

number of minutes or hours before the actual sunrise or sunset 

occurs.

Clock

9

Summary of Contents for 010-01338-2A





























Reviews: