Installation
Garland RTCSmp Induction Built-in Griddles
Part # 4532291 Rev 2 (01/15/14)
11
The call-outs in the illustrations show:
(
C
) Air Intake Kit: the air duct can be connected from the unit to the bottom or to the side of the cabinet.
(
D
) If there is no direct path to install the air intake duct/grease chute, make openings on an inner shelf for
the duct/chute to pass through.
(
E
) Hot air exhaust from the induction unit.
(
F
) Louvered air exhaust opening installed on the cabinet.
(
G
) Fresh air supply through the intake duct.
(
H
) Custom-built grease bucket with extended grease chute.
4.5
Dimensions and Installation
4.5.1
Control Unit
The induction unit comes with a complete control unit and a RJ-45 cable.
NOTE
The control unit is to be stud-mounted
VERTICALLY
onto the back of the panel. Installers are
responsible for choosing the appropriate fasteners for the installation.
Dimensions of Control Unit for RTCSmp Install Griddle-Line—Single (measurements in mm and [inch])
A.
Digital Display
B.
CAN/BUS
Connection
