manualshive.com logo in svg

Garland PacketMAX GAA10G10AC, User Manual

Share
Download
Garland PacketMAX GAA10G10AC User Manual Download Page 26

Aggregator

PacketMAX™ Advanced Aggregator | GAA10G10AC | 1.19.2

4 Port Info

The following configuration options may be displayed, modified, cleared or refreshed under the

Port Info panel.

Port Number

Mode

Port Description

SFP Data

Link

Split

Set Speed

Port Statistics

Speed

1. Select Port Info on the Dashboard menu bar.

The Port Configuration panel will be displayed.

4.1 Port Configuration

The port configuration is displayed by default. The Description, Set Speed and Mode may be

modified. All other options are display only. However, they may be updated by selecting Refresh.

4.1.1 Port Description

1. Modify the port description by placing the cursor on Port Description for the desired port

and press the left mouse button.

The Edit Description panel will be displayed.

Garland Technology  |  716.242.8500  | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.

25

Summary of Contents for PacketMAX GAA10G10AC




























Reviews:

No comments

Brands by name

Popular brands

Load more brands