Aggregator
PacketMAX™ Advanced Aggregator | GAA10G10AC | 1.19.2
3.3.9 Config Map Priority
The config map priority needs to be considered when the same ingress port(s) is used in multiple config
maps to send traffic to multiple egress options, ie, different port(s) or load balancing groups. In this case,
the config map with the highest priority will be considered first. In the following example there are three
config maps with ingress port 3. The Traffic_A config map is the highest priority 1, the Traffic_B config
map is the next priority 2 and finally the Traffic_C is the next priority 3.
Figure 9 Config Map System Considerations
The Priority of a config map may be changed to a higher or lower value using two methods.
Method 1
1. Select the up or down arrow for the config map.
2. Select Save to save updates.
Method 2
1. Select Set.
The Set Priority panel will be displayed.
2. Enter the priority in the Set New Priority panel.
3. Select Set to accept the priority value.
4. Select Cancel to disregard.
5. Select Save to save updates.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
23
