Aggregator
PacketMAX™ Advanced Aggregator | GAA10G10AC | 1.19.2
3 Packet Broker
The following configuration options may be displayed, modified, enabled or disabled under the
Packet Broker panel.
Configuration Maps
Load Balance Policy
Filter Templates
Load Balance Groups
1. Select Packet Broker on the Dashboard menu bar.
The Packet Broker Configurations panel will be displayed.
3.1 Filter Template
Filter templates may be created as a pass all, pass by or deny by. Pass by and deny by templates
may include multiple matching options to filter traffic. The options are considered by the system as (and)
options. Thus, for traffic to pass or be denied it must match all defined options. Once a template is
created it will appear on the Create Config Map panel and may be used to create an ingress or egress
filter. Template options may be modified when applied to a config map. Any option modification made will
not change the original template. It is advisable to rename a filter applied to a config map if the original
template options were modified.
1. Select Filter Templates on the Packet Broker Configurations panel.
The Filter Templates panel will be displayed.
2. Select Create Template.
The Create New Filter Template panel will be displayed.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
14
