Aggregator
PacketMAX™ Advanced Aggregator | GAA10G10AC | 1.19.2
7. TACACS Test
This option may be used to verify the authentication of a TACACS user and password. The
TACACS Test option will be active only if TACACS Authentication has been enabled.
The TACACS Test panel will appear.
7.1 Enter the Username.
7.2 Enter the Password.
7.3 Select Test.
The GUI will display the results of the authentication of the user and the password entered.
8. TACACS Ping
This option may be used to verify the network connectivity from the unit to the TACACS server.
The TACACS Ping option will be active only if TACACS authentication has been enabled.
The GUI will display the results of the ping test.
2.4 Network Settings
The following configuration options may be displayed, modified, enabled, or disabled.
Any change made
to any network setting option could cause network connectivity disruption for about 60 seconds.
DHCP
IP Address
Mask
Gateway
DNS 1
DNS 2
SSL Certificate Loaded
Using Uploaded SSL Certificate
1. Select Network Settings.
The Network Settings panel will be displayed with the current configuration.
2. Select Edit Settings.
The Network Settings panel will appear.
3. Enable, disable or modify the desired options.
4. Enable or disable Using Uploaded SSL Certificate.
This option may be enabled if a SSL cert.pem file and key.pem file have been uploaded
to the unit using the Add SSL Certificate option on the Network Settings panel.
5. Select Save to save updates.
6. Select Cancel to return the Network Settings panel.
7. Add SSL Certificate.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
9
